Current location: Home > News > Industry News > The Comprehensive Analysis Of The Technology Sealing For Airless Plastic Tubes
The Comprehensive Analysis Of The Technology Sealing For Airless Plastic Tubes
2014-10-01 11:17:00
Categories：Industry News News Center
Visit：558
release time：2014-10-01 11:17:00
Source：
Airless Plastic Tube
During the heat sealing ,This kind of technology for airless plastic tube is already in a more mature technology. However some users who use this tube sealing machine still met all kinds of problems when they are using the machine. The emergence of these problems, the main reason is the correct operation and commissioning of the equipment besides the device itself low quality.
We are now on some common problems (not including the equipment itself caused the problems of low quality) for some analysis.
First of all, based on the analysis of the specific problem must be carried out on the equipment before the following test.
It’s actual speed detection equipment is same as the specifications of the initial debugging good speed;
Whether low detection LEISTER heater in open position;
Low detection equipment of the compressed air supply pressure whether meet the requirements of equipment normal work time pressure;
Low test for a smooth circulation cooling water and cooling water temperature is within the range of equipment requirements;
Low detection equipment filling the phenomenon of whether there is a drop of cream, especially to ensure that the paste untouched on the table within the wall of the upper;
The inner surface of the low hose don’t contact with anything, so as to avoid the pollution of tube sheet wall;
Low detection LEISTER heater inlet is normal
Low detection heater internal temperature detector is in correct position
Low detection heating head convulsions devices work is normal
