The technology of tail sealing for laminated tube.Appear on the left is usually excessively high temperature phenomenon 1. At this time whether should detect the actual temperature is the specification tube work normally when the required temperature.

 

Temperature display on the actual temperature should be relatively stable in the set temperature (normal deviation range between 1 ℃ and 3 ℃).

, the phenomenon of the shown below side have ears: first detects whether the heating head right in heating head nest; And then to detect verticality heating under the head and the hose.

 

Side have ears of another possible reason is two pieces of parallelism of the stern plate has a deviation.As for this laminated tube ,we would like to seal the tail with some new technology.Clip tail plate parallelism deviation can be achieved by a gasket to between 0.2 to 0.3 mm for testing (detection means such as example is shown in the left picture)In sealing explosion-proof offline "pouch" : that is for the heating head of the height of the air flow is wrong, may be adjusted according to the following way.